What is the bolt pattern on a 2006-2015 Mazda MX-5 Miata?

The 2006-2015 Mazda MX-5 Miata uses a 5x114.3 bolt pattern with a 67.1mm center bore. We confirmed this against two independent sources. A wheel has to match this pattern exactly to bolt up — double-check against your own wheel before buying.

What lug nut size does the MX-5 Miata use?

The MX-5 Miata uses M12x1.5 lug nuts. Buy hardware to that exact thread and seat — the wrong pitch or seat won't tighten safely.

2006-2015 Mazda MX-5 Miata wheel fitment

The factory bolt pattern, center bore, lug thread and OE wheel sizes for your MX-5 Miata, confirmed against two independent sources. Match any wheel or hardware to these specs — and always confirm against your own wheel before buying.

Affiliate disclosure: CarCareTruth is reader-supported. As an Amazon Associate I earn from qualifying purchases. We may also earn commissions from other retailers linked on this page, at no extra cost to you. Affiliate revenue never influences our scores or rankings. Full disclosure

Factory wheel fitment

Verified · 2 sources · Jun 2026

Bolt pattern	5x114.3
Center bore	67.1 mm
Lug thread	M12x1.5

Cross-checked against two independent sources. Always confirm the bolt pattern, bore and thread against your own wheel before buying hardware — and torque your lug nuts to the figure above with a proper wrench.

Wheel hardware that fits these specs

Sized to your confirmed bolt pattern, bore and thread — so the rings, nuts/bolts and spacers actually fit.

Hub-centric ringsMatch your 67.1mm hub so aftermarket wheels sit dead-center (no vibration).Search on Amazon →Lug nutsM12x1.5 — the right thread for a safe torque.Search on Amazon →Wheel spacers5x114.3 spacers to push your wheels out for a flush stance or clearance.Search on Amazon →

MX-5 Miata wheel fitment questions

What is the bolt pattern on a 2006-2015 Mazda MX-5 Miata?: The 2006-2015 Mazda MX-5 Miata uses a 5x114.3 bolt pattern with a 67.1mm center bore. We confirmed this against two independent sources. A wheel has to match this pattern exactly to bolt up — double-check against your own wheel before buying.
What lug nut size does the MX-5 Miata use?: The MX-5 Miata uses M12x1.5 lug nuts. Buy hardware to that exact thread and seat — the wrong pitch or seat won't tighten safely.