CarCareTruth Score
Decent.
Opens Amazon in a new tab. No account needed to look.
Saved to your guest loadout. Sign up to also save to your Cabinet (consumables) or Kit (tools you own).
As an Amazon Associate I earn from qualifying purchases. Full disclosure
Prices may varyThis product ranks #11 of 12 in Sockets & Socket Sets.Three above it ↓
Last reviewed June 29, 2026
TL;DR A 65-piece 1/2-in drive impact socket set with SAE (3/8 in - 1-1/4 in) and metric (10-24 mm) in both shallow and deep variants, 6-point chrome-vanadium steel with black phosphate finish, and the 10 mm metric confirmed present. Single-drive-size coverage only (no 1/4-in or 3/8-in drive); chrome-vanadium alloy is confirmed but Cr-Mo impact rating is not confirmed from manufacturer spec, so impact wrench use carries standard Cr-V risk.
This 1/2-in drive set includes 58 sockets covering SAE from 3/8 in through 1-1/4 in and metric from 10 mm through 24 mm, in both shallow and deep variants. The 10 mm metric is explicitly listed in the spec sheet. Steel is chrome-vanadium with a black phosphate finish; 6-point construction is confirmed across all sockets. Only the 1/2-in drive size is included: no 1/4-in or 3/8-in drive sockets. Community evidence spans multiple years of ownership with no widespread rounding or steel failure reports. Marketed as an impact socket set, though the alloy is Cr-V, not the Cr-Mo typical of fully impact-rated sets; the black phosphate finish is consistent with impact-duty use.
The right pick for a home mechanic tackling wheel lug nuts, suspension fasteners, and larger engine-bay bolts where 1/2-in drive is the correct tool. The 6-point chrome-vanadium sockets handle corroded OEM hardware reliably, and the dual SAE and metric coverage with both shallow and deep variants means no supplemental purchase for most 1/2-in drive tasks. Skip this if you also need 3/8-in or 1/4-in drive coverage for oil changes, brake caliper bolts, and smaller engine hardware; a set covering all three drive sizes handles those without a second purchase. Also skip if you need confirmed Cr-Mo impact-rated sockets for regular high-duty impact wrench use at professional torque levels.
No chemical exposure pathway; this is a chrome-vanadium steel hand tool with no SDS. Chrome-vanadium steel is rated for hand-ratchet and breaker-bar use; the black phosphate finish is consistent with impact-duty use at home-mechanic torque levels, but Cr-Mo alloy (the confirmed impact standard) is not stated by the manufacturer, so sustained high-torque impact wrench use carries the typical Cr-V risk of shattering under extreme impulse loads. Chrome-vanadium steel is fully recyclable as scrap metal; the blow-mold plastic case is not routinely recovered through curbside programs, and no manufacturer take-back program is available.
Yes. The manufacturer spec list explicitly confirms a 10 mm metric socket in both shallow and deep configurations. The metric range runs from 10 mm through 24 mm.
The set is marketed as an impact socket set and uses a black phosphate finish, which is consistent with impact-duty use. However, the steel alloy is chrome-vanadium (Cr-V), not the chrome-molybdenum (Cr-Mo) alloy used in fully impact-rated sockets. Community reports confirm use with impact drivers at home-mechanic torque levels without shattering, but sustained high-torque professional impact wrench use carries the typical Cr-V risk.
No. This is a 1/2-in drive set only. It does not include 1/4-in or 3/8-in drive sockets. If you also need smaller-fastener coverage for oil changes and engine-bay electrical work, a separate 3/8-in drive set is required.
The blow-mold case is adequate for toolbox storage but has documented issues with the side latches and lid retention. Multiple long-term owners report sockets rattling loose during transport and latches popping off. For shop-bench storage the case works well; for frequent job-site transport, the socket retention is a known weakness.
The Amazon listing for Neiko NEIKO 02448A 65-Piece 1/2" Drive Master Impact Socket Set carries a California Prop 65 warning. California requires this warning on a very wide range of manufactured goods — including rubber, vinyl, plastic, and metal automotive parts — whenever trace exposure to any of roughly 900 listed substances (commonly phthalates or heavy metals) is possible, regardless of whether the specific product poses a meaningful health risk. As a passive tool, Neiko NEIKO 02448A 65-Piece 1/2" Drive Master Impact Socket Set has no Safety Data Sheet, so there's no chemistry breakdown to translate beyond that.
Marketing copy from Neiko, via Amazon. Not editorial.
Weekly pick
One product, one safety verdict, every week. No spam.
Sunex Tools
3580 80-Piece 3/8 Inch Drive Master Impact Socket Set
Sunex Tools
3342 3/8 Inch Drive Master Impact Socket Set, 42-Piece
DEWALT
DWMT73803 168-Piece Mechanics Tool Set
GEARWRENCH
163-Piece 1/4, 3/8 & 1/2 Drive 6-Point Master Socket Set
As an Amazon Associate I earn from qualifying purchases. Full disclosure
Community
0 postsShare how you use this product
Drop a quick comment or post a full review with photos and a star rating.
Sign in to postNew here? Create a free account.