Skip to content
CarCareTruth

1986-1995 Acura Legend tire pressure

The factory recommended front and rear PSI for your Legend, per OE tire size, confirmed against two independent sources. Set them on cold tires. The sticker inside your driver's door is always the final word — it's specific to your exact trim and tire size.

Affiliate disclosure: CarCareTruth is reader-supported. As an Amazon Associate I earn from qualifying purchases. We may also earn commissions from other retailers linked on this page, at no extra cost to you. Affiliate revenue never influences our scores or rankings. Full disclosure

Recommended tire pressure (cold)

Verified · 2 sources · Jun 2026
Tire sizeFrontRear
205/60R1532psi30psi

Set these on COLD tires (before driving, or after the car has sat 3+ hours). These match two independent sources, but the sticker inside your driver's door jamb is the final word — it's specific to your exact trim and tire size.

Set it right: the gear you need

Knowing the number is half of it — here's a CarCareTruth-scored inflator and gauge to actually hit it.

Milwaukee M18 Inflator (2848-20)

Portable inflator

M18 Inflator (2848-20)

Milwaukee · CCT 7.5/10

Legend tire pressure questions

What tire pressure should a 1986-1995 Acura Legend be?
The factory recommended tire pressure for the 1986-1995 Acura Legend is 32 psi front / 30 psi rear, set on cold tires. We confirmed this against two independent sources. The sticker on your driver's-door jamb is the final word — it lists the exact pressures for your trim and tire size.
Where is the tire pressure listed on a Legend?
Open the driver's door and look at the jamb. The placard there lists the factory recommended front and rear pressures for your Legend, by tire size. That sticker is the authority, even over our number. Don't use the max pressure molded into the tire sidewall — that's a ceiling, not the recommended figure.