CarCareTruth Score
Recommended.
Opens Amazon in a new tab. No account needed to look.
Saved to your guest loadout. Sign up to also save to your Cabinet (consumables) or Kit (tools you own).
As an Amazon Associate I earn from qualifying purchases. Full disclosure
Prices may varyThis product ranks #1 of 14 in Foam Cannon.
Last reviewed June 9, 2026
TL;DR At 2.0+ GPM the PF22.2 produces dense, slow-sliding foam that clings 60-90 seconds per Autogeek forum reports; nickel-plated brass valve body and FRP construction documented through 3-4 seasons by multiple long-term owners.
A nickel-plated brass valve body foam cannon made in Italy, connecting via standard 1/4" quick-connect (M22 adapter included). The 32 oz wide-mouth HDPE bottle mounts via a bayonet disconnect. Community-confirmed output at 1,500-2,500 PSI / 1.5-2.5 GPM: thick, clinging coverage that dwells on painted surfaces. Two orifice sizes included (1.25 mm installed, 1.1 mm spare). Ratio knob and fan blades are functional; minor community-reported looseness in the fan adjustment under pressure.
Best for home detailers running a pressure washer at 1,500+ PSI and 1.5+ GPM who want a proper foam pre-soak. Skip if the pressure washer is below 1.4 GPM; a garden-hose foam gun delivers better foam-to-effort at that flow rate. Note: listed as an Amazon Add-On Item, requires a qualifying cart total to purchase on its own.
Hardware; health score is 9.5 (Minimal Risk). Brass valve is scrap-metal recyclable; HDPE bottle is #2 recyclable; FRP outer body is mixed-material with no take-back program.
The PF22.2 is rated at 1,100-5,000 PSI and 1.4-5.3 GPM. Most home electric pressure washers fall at the low end of that range (1,600-2,000 PSI / 1.2-1.6 GPM). Community reports confirm the cannon produces foam at 1.4+ GPM, but thicker, slower-sliding coverage is reported at 2.0+ GPM setups. At the lowest electric-washer GPM, a foam gun (garden-hose-fed) may deliver better foam-to-effort results.
Both. The cannon connects via standard 1/4" quick-connect fitting, and an M22 adapter is included in the box. Most residential and professional pressure washers in North America use 1/4" quick-connect, so no additional parts are usually needed. MTM's proprietary fittings are standard for commercial-grade setups; the included fittings cover the large majority of home-detailer configurations.
The PF22.2 is the updated wide-mouth bottle version of the original PF22. The key change is the wide-mouth HDPE bottle (32 oz, quick-disconnect bayonet mount) versus the original narrow-mouth design, which improved filling and reduced spills. The brass valve body and Italian construction are shared across both generations.
Foam thickness is primarily driven by soap concentration and pressure-washer flow rate, not by the cannon alone. Community reports confirm thick coverage with most dedicated snow-foam soaps at 2.0+ GPM. Dial the soap-injection knob clockwise to increase soap draw. Opening the fan-pattern blades wide creates a broader pattern; narrowing them concentrates foam on a smaller area.
Multiple community long-term reviews on Autogeek and Detailed Image report 3-4 seasons of regular use without failure, citing the brass valve body as the durability driver. The HDPE bottle and bayonet fitting are the higher-wear components; replacement bottles and O-ring kits are available from MTM's parts network. Normal post-session rinsing with clean water significantly extends component life.
Marketing copy from MTM Hydro, via Amazon. Not editorial.
Guide
Car Wash Methods, Explained: Every Way to Wash a Car
Every wash method is one answer to the same question: how do you lift grit off the paint without dragging it across the clear coat. Match the method to your dirt level and water access, and when in doubt, pre-rinse.
Guide
Foam Cannon vs Pressure Washer vs Pump Sprayer (2026)
Foam cannons need a pressure washer, roughly 500 to 1,100 PSI depending on the cannon, plus about 1.4 GPM of flow, and the flow matters as much as the pressure for dense foam. A pump sprayer like the iK Foam Pro 2 works with no hose at all, which makes it the only path for apartments and condos without outdoor water access. Cling time on the panel matters more than foam height.
Guide
How Often to Actually Wash Your Car (by Climate)
Every two weeks is wrong for most people. Salt-belt cars need a full wash plus undercarriage rinse every 7 to 14 days through the salt season. Coastal cars run 2 to 3 weeks year-round. Desert cars stretch to 3 to 4 weeks but need waterless or rinseless methods in between.
Guide
Two-Bucket vs Rinseless vs Waterless: When Each Makes Sense
Two-bucket is mandatory for heavy contamination like salt, mud, and post-neglect grime. Rinseless wins for apartments, winter, and weekly maintenance on protected paint. Waterless is dust-only on garage queens.
Weekly pick
One product, one safety verdict, every week. No spam.
Currently in the top 2 of its category — appears as a pick in:
Adam's Polishes
Premium Foam Cannon
Griot's Garage
Brilliant Finish Foam Cannon
Chemical Guys
Big Mouth Max Release Foam Cannon (EQP324)
MJJC
Foam Cannon S V3.0
As an Amazon Associate I earn from qualifying purchases. Full disclosure
Community
0 postsShare how you use this product
Drop a quick comment or post a full review with photos and a star rating.
Sign in to postNew here? Create a free account.