iK Foam Pro 12 Pump Sprayer

The iK Foam Pro 12 is a self-contained hand-pumped foam sprayer · it does not connect to a garden hose or pressure washer. You fill the 6-liter tank with a diluted soap solution, pump the handle to pressurize the tank, and spray directly. No hose or external water source is required during application.

The '12' refers to the maximum rated working pressure in bar (approximately 174 PSI burst resistance), not the tank capacity. Operating pressure for foam application is typically 30·60 PSI, well within the rated range. The tank holds up to 6 liters.

Yes. The iK Foam Pro 12 includes a Schrader valve (the same type used on bicycle and car tires) that accepts a compressor or CO2 inflator. This is useful if you prefer not to hand-pump the full 30·40 strokes to reach operating pressure.

At full pressurization, Detailing World and Autogeek forum users report 60·90 seconds of cling on vertical panels before the foam starts sliding noticeably · comparable to output from low-to-mid pressure-washer cannons. Output thins as tank pressure drops over the spray cycle, which is normal for pump sprayers.

Yes. iK manufactures replacement seal kits for the Foam Pro line. Seal replacement is the primary maintenance step that enables multi-year service life · forum threads on Autogeek document users running these sprayers for 5+ years after one or two seal-kit replacements.