Flexzilla Retractable Extension Cord Reel, 16/3 AWG, 25 ft, ZillaGreen

The Flexzilla FZ8160253 carries 25 ft of 16 AWG / 3-conductor SJTOW oil-resistant cord on a spring-loaded retractable spool, rated 10 A / 125 V / 1,250 W with a 5-ft lead-in cord. At 25 ft and 10 A, 16 AWG is not undersized · NEC Table 400.5 rates 16 AWG flexible cord at 13 A, and the voltage drop at 10 A continuous over 25 ft is approximately 1.6%, well within acceptable range for the rated load. The listing and product box display a cULus Listed mark (dual Canada/US scope), but database verification in UL Product iQ was not completed; the certification standard is unconfirmed. A push-button reset circuit breaker is integrated into the green housing panel. The spring-loaded retraction locks the cord in 1-ft increments via an auto-stop ratchet; community reviews confirm the lock works reliably across 1·2 years of garage use, though engaging the detent requires deliberate cord-tension control rather than a simple pull-and-release. The lighted triple-tap NEMA 5-15 outlet block provides three receptacles with a power-on indicator. It's well-reviewed by owners, with no documented spring or slip-ring failures in the available review sample.

Right choice for single-bay garage setups where a 25-ft working radius covers the space and 10 A continuous draw matches the planned loads · battery chargers, work lights, DA polishers, inflators. The wall-or-ceiling swivel bracket fits tight installation geometries, and the 16 AWG SJTOW cord handles the rated 10 A load without voltage-drop concern at this length. Skip this for loads drawing above 10 A continuous (shop vacs, large compressors, rotary polishers at high draw) · the 50-ft / 14 AWG or 60-ft / 12 AWG siblings are built for that load range. Also note: this listing is an Amazon Add-On item and requires a qualifying order total for free standard shipping. The unconfirmed certification standard is a consideration for any unattended or sustained-load application.

UL 355 is the US product standard for cord reels · it covers heat buildup under rated load with the cord partially retracted in the housing, slip-ring assembly integrity, and outlet block thermal performance. This product displays a cULus Listed mark on the housing and product box; that certification could not be located in UL Product iQ on 2026-05-31, and the exact standard cited (UL 355 cord reel assembly vs. UL 817 cord set) is unconfirmed. The 16 AWG cord matches the rated 10 A at 25 ft per NEC Table 400.5 reference · no undersized-gauge concern applies at this length and amperage combination. A circuit breaker on the housing with push-button manual reset adds an overcurrent protection layer beyond the building's main breaker. Copper conductors are highly recyclable at scrap metal facilities; the SJTOW thermoplastic jacket is the limiting non-recyclable fraction. Amazon carries a Prop 65 warning on this listing · copper and lead compounds in wire assemblies are the typical basis for this designation on cord products.

Is this an Amazon Add-On item? Yes. Amazon Add-On items ship free only when included in a qualifying order of $25 or more (Prime eligible). The listing is in stock and the affiliate link is fully active; the Add-On status only affects free shipping eligibility.

What is the warranty on this cord reel? The Flexzilla FZ8160253 carries a 1-year limited warranty per the product specifications table.

What does the cULus mark mean? cULus is a dual Canada/US listing scope from Underwriters Laboratories. It is equivalent to UL Listed for US purposes. The "c" prefix indicates the listing also satisfies Canadian Standards Association requirements. Database verification in UL Product iQ was attempted on 2026-05-31 but could not be completed; the certification standard (UL 355 for cord reel assembly vs. UL 817 for cord set only) is not confirmed from available sources.

What loads is this cord rated for? 10 A continuous maximum (1,250 W at 125 V). Appropriate uses include battery chargers, work lights, DA polishers, inflators, fans, and other light-draw shop equipment. Loads exceeding 10 A · large shop vacs, air compressors, rotary polishers at high draw · should use the 50-ft / 14 AWG or 60-ft / 12 AWG variants, which are rated for 15 A.

Does mounting hardware come with the reel? No. Owners consistently note that no mounting hardware is included. Standard 1/4" lag screws into a wall stud or ceiling joist are the community-recommended installation method.